ORGANIC VAPOR, HIGH CAPACITY BADGE, 10BX

Assay Technology’s 546 High Capacity Organic Vapor Badge is excellent for all-day monitoring of organic vapors that have high PELs (greater than 200 ppm). The 19-hole sampling face greatly reduces the possibility that the collection media becomes saturated, making a second wafer inside the badge unnecessary in most environments. While the 8-hour reporting limits are different for each chemical, they are generally around 0.5 ppm, which is well below most PELs. For specific information about your chemical of interest, check our Sampling Guide. The 546 badge is not usually recommended for STEL (15-minute) monitoring. This badge is NON-RETURNABLE Assay Technology also manufactures two other Organic Vapor Monitors, our 566 and 525 badge. For assistance in choosing which is best for your situation, use our guide. Please note: The 546 monitor can NOT be used for acetic acid monitoring. See our 543 Acetic Acid Monitor. Industrial Hygiene Labs: Sampling rates are listed in our Sampling Guide or Requested Sampling Rates page (search by CAS #). Contact us if you can’t find a rate you need. Opening the ChemDisk is made much easier using the pick we specify. Media is available for QC testing. Use our M products (e.g. M566). The media inside the 546 and 566 badges is the same. The only difference between the two badges is the sampling grid. This badge collects the following: Acetone n-Butyl Acetate t-Butyl Acetate Chlorobromomethane Cyclohexane Dichlorodifluoromethane 1,2-Dichloroethylene Dichlorotetrafluoroethane Ethyl Acetate Ethanol Ethyl Chloride Ethyl Ether n-Heptane Isobutyl Acetate Isopropyl Acetate Isopropyl Alcohol Isopropyl Ether Store at room temperature before and after use. Refrigerated storage is always OK. It is recommended that the badge be returned to the lab within 14 days of use. Use for: 8-hour TWA for chemicals with a PEL 200 ppm or greater. For STEL monitoring, always use a 566 or 525 badge.